HVAC Residential AC Service Furnace Repair & Replacement Lisle Naperville Downers Grove Darien Woodridge Bolingbrook Aurora

(630) 949-8600

Call or Text us for Service

service@getadvantageair.com

Frequently Asked Questions....

What HVAC Services do you provide?

Advantage Air Heating & Cooling Lisle/Naperville repairs and services all makes and models of Residential Gas Heating & AC systems, including High-Efficiency HVAC units.

We provide Emergency repair same day service for No Heat calls and No AC calls, in addition to regular maintenance service and new Furnace and AC installations when it is time to replace your existing system. We value our customers, their business and their referrals.

We look forward to helping you with all of your residential Heating and Air Conditioning needs.

What Towns/Cities does Advantage Air Heating & Cooling service?

Advantage Air Heating & Cooling based in Lisle/Naperville provides residential service, repairs and installations for nearby towns/suburbs including:

Naperville, Lisle, Downers Grove, Woodridge, Westmont, Darien, Willowbrook, Clarendon Hills, Hinsdale, Burr Ridge, Bolingbrook, Aurora, Wheaton, Glen Ellyn, Winfield, Warrenville, Lombard, Villa Park, Elmhurst, Oak Brook

What HVAC Brands does Advantage Air Heating & Cooling service and repair?

We service and repair ALL Brands/Models including: Carrier, Trane, Lennox, American Standard, Armstrong, Rheem, Ruud, Amana, Goodman, Ducane, Bryant, Payne, York, Heil, ComfortMaker, Tempstar, Day & Night, Allied Air, Luxaire, Coleman, etc.

NOTE: We do not service or install Hot Water Heaters or Boilers

How do I know if my gas furnace needs repair?

SIGNS YOUR GAS HEATING SYSTEM NEEDS REPAIR

-> Not enough heat or none at all

-> Furnace cycles on and off too frequently

-> Furnace blower runs continuously

-> Furnace makes squealing or rumbling sounds

-> Furnace comes on for a few seconds and then turns off

-> Furnace burners do not ignite

-> Furnace is running but not reaching temp set on Tstat

-> CO Alarm triggered or occupants feel lethargic, weak or disoriented (Call Fire Dept. if you believe CO is leaking or is serious issue)

-> Smell of gas (turn off gas or call Gas Company or Fire Department for Emergency

CALL OR TEXT Advantage Air Heating & Cooling at (630) 949-8600 to schedule a Furnace Service Call for diagnosis and repair

What should I check before I call for heating repair?

"BEFORE YOU CALL" Heating Checklist

Some repairs are quite simple. Use this checklist before calling for a repair. It may save you time and money.

1. Check the thermostat to be sure it’s set on “heat” for wintertime operation.

2. Check the circuit breaker in the electrical panel to be sure it’s set in the on position. If you have fuses, check for a blown fuse.

3. Is there power to the furnace? Check that all switches are in the on position.

4. Has the filter been changed? A blocked filter can cause a furnace to shut down due to inadequate air flow. Similarly, are the air intake grills open and clear of obstructions?

5. Clean the contacts on a non-digital thermostat.

If you’ve gone through the “Before You Call” checklist and are still having problems, call or text Advantage Air Heating & Cooling at (630) 949-8600 for service!

How do I know if my Air Conditioner needs repair?

SIGNS YOUR AC NEEDS REPAIR

-> Circuit breaker trips when AC turns on

-> Outside AC unit 'hums' but fan does not start/run

-> Outside AC unit is running but inside blower is not

-> Condensation is leaking inside house - water around Furnace or down side of Coil/Furnace

-> Ice on lines going out to AC Condenser

-> AC unit runs constantly - doesn't reach temperature set on Tstat

-> Some rooms are warmer than others

CALL OR TEXT Advantage Air Heating & Cooling at (630) 949-8600 to schedule an AC Service Call for diagnosis and repair

What should I check before I call for AC repair?

'BEFORE YOU CALL" Air Conditioning Checklist

Some repairs are quite simple. Use this checklist before calling for a repair. It may save you time and money.

1. Check the thermostat to be sure it’s set on “cool” for summertime operation and that the setting is below the temperature of the room.

2. Check the circuit breaker in the electrical panel to be sure it’s set in the "on" position. If you have fuses, check for a blown fuse.

3. Is there power to the furnace? Check that all switches are in the on position.

4. Has the filter been changed? A blocked filter can cause an air conditioning system to shut down due to inadequate air flow. Similarly, are the air intake grills open and clear of obstructions?

5. Clean the contacts on a non-digital thermostat.

If you’ve gone through the “Before You Call” checklist and are still having problems, call or text Advantage Air Heating & Cooling at (630) 949-8600 for service!

What does an AC clean & check include?

AIR CONDITIONER CLEAN & CHECK

-> Inspect Condenser coil and cabinet - clean as needed

-> Clean dirt, leaves and debris off outside Coils (property cleaned from the INSIDE out)

-> Inspect unit for proper refrigerant level

-> Inspect AC fan motor and fan blades for wear or damage plus proper voltage

-> Check Amperage draw and electrical connections

-> Inspect Furnace air filter - replace customer provided filter

CALL OR TEXT Advantage Air Heating & Cooling at (630) 949-8600 to schedule your AC clean & check special

What does a Furnace clean & check include?

GAS FURNACE CLEAN & CHECK

-> Inspect Furnace burner assembly - clean as needed

-> Inspect and clean Furnace flame sensor

-> Inspect ignition system and safety controls - clean as needed

-> Inspect Furnace blower assembly

-> Check Amperage draw and electrical connections

-> Inspect Heat Exchanger for cracks, rust and CO leaks

-> Inspect Flue system - check for proper attachment to the furnace, any dislocated sections and for signs of corrosion

-> Inspect Furnace air filter - replace customer provided filter

-> Inspect control box, associated controls, wiring and connections

CALL OR TEXT Advantage Air Heating & Cooling at (630) 949-8600 to schedule your Furnace clean & check special

When should I schedule my maintenance cleaning?

-> For Air Conditioners - perform maintenance/cleaning once a year during the Spring once the average daily High temp is steadily in the 60’s or above (before the high temps & humidity of the summer)

-> For Furnaces - perform maintenance/cleaning once a year during the Fall (before the very cold weather hits)

CALL OR TEXT Advantage Air Heating & Cooling at (630) 949-8600 to schedule your AC clean & check special

Why do I need maintenance or cleaning of my Heating & AC system?

Would you drive your car 100,000 miles without changing the oil? Your home comfort system needs regular maintenance to avoid rising utility bills and to keep problems from arising at the most inconvenient time. Small problems can turn into large problems if not caught in time.

Regular HVAC preventative maintenance is the best way to ensure trouble-free operation and peak performance. Pre-season maintenance is also important. It can help to avoid a system failure in severe hot or cold weather when you need it most, and it can also keep your energy bill from getting out of control.

Regardless of make and model, nearly all furnace and air conditioner manufacturers require that their systems be cleaned annually in order to maintain warranty coverage. They realize how a lack of proper maintenance can damage the vital components within the units. This is why manufactures include a maintenance requirement within their warranties and failure to complete the cleanings regularly will result in loss of coverage.

CALL OR TEXT Advantage Air Heating & Cooling at (630) 949-8600 to schedule your AC or Furnace clean & check special

How do I know it’s time to replace my furnace or air conditioner?

-> Are you dissatisfied with the operation of your current air conditioner or heating system?

-> Are you concerned about high utility bills?

-> Is your home not cool enough during the summer or warm enough during the winter?

-> Is your current Furnace or AC more than 12-15 years old?

-> Is your current Furnace or AC very noisy? Do you have to crank up the TV volume when the Furnace or Blower Fan kicks on?

-> Have you had major Furnace repairs in the last 2 years or have needed to add refrigerant to your AC the last couple season?

If you answered YES to any of these questions, schedule a no-cost HVAC Quote with Advantage Air Heating & Cooling Lisle/Naperville. We will provide you with a free, no-obligation estimate on a new Furnace install, new AC install, or complete HVAC system install provided by a skilled Technician, never a salesperson.

Do you offer Financing options for new Furnace and AC installations?

Yes, we have 3rd party Financing options available for installations of new Gas Furnaces and Air Conditioners. Please contact Advantage Air Heating & Cooling office at (630) 949-8600 to learn about our current Financing plan options for new system installation including 0% interest plans.

Do you offer Free Estimates?

If you are looking to replace your existing Furnace or Air Conditioner, Advantage Air Heating & Cooling Lisle/Naperville is happy to provide a free, no-cost or obligation estimate on a new AC and/or Furnace. Our no-cost estimates are always done by one of our highly skilled Technicians in order to make sure you are getting the correct equipment size and be able to discuss different efficiency options and Brands. We never send a Salesperson for quotes so there is no high pressure sales to worry about.

If you are needing repairs on your Furnace or AC, there would be a service fee charged to come out and diagnose the issue and give you the repair cost. [Note: We would credit this service fee off of a new Furnace or AC installation if you choose that option instead of repairing the unit.]

Why should I choose Advantage Air Heating & Cooling to install my new AC or Furnace?

No other single system in your home plays a larger role in your comfort or how much your utility bill will be than your AC and Gas Heating system. We specialize in high-efficiency HVAC solutions that will keep your whole house comfortable while keeping utility costs low.

Proper equipment sizing, selection, installation, maintenance, and correct use are keys to cost-effective operation and lower overall costs and energy-savings.

At Advantage Air Heating & Cooling Lisle/Naperville, we offer free estimates on new HVAC system installations and will help you choose the system that’s right for your home and budget.

WHY CHOOSE ADVANTAGE AIR HEATING & COOLING FOR YOUR NEW AC OR FURNACE:

-> We take the time to properly select and size the system that's right for your home to keep you cool during the hot humid summer and warm during the frigid cold winter

-> We provide a high-quality installation and educate you on system operation

-> Proper installation of your Furnace and AC are just as important as having the proper equipment. A poor installation will cost more on your Utility bills and shorten the life of your HVAC equipment

-> We are committed to the utmost in integrity, honesty and professional service

-> After your installation, Advantage Air Heating & Cooling will register your new equipment online with the Manufacturer for your extended parts warranty coverage

Do you offer any specials on cleanings or installations?

Yes! Advantage Air Heating & Cooling Lisle/Naperville offers an "early-bird" cleaning special every Spring and Fall season. We also offer special package discounts on a complete AC & Furnace installations and have seasonal new install Sales.

Check out our Specials & Coupons page at https://www.advantageairheatingcooling.com/specials

Feel free to contact our office at (630) 949-8600 (call or text) or email us at service@getadvantageair.com to inquire about our current specials & deals

Working...